If the video cable is fine, reconnect your computer to your monitor.
If any connector on your device is bent or damaged, you’ll need to take the device to a repair shop.Ĥ) Check to see if your video cable is damaged. Here is how to do it:ġ) Press and hold the power button until your computer turns off.Ģ) Unplug the video cable which connects your monitor to the computer.ģ) Check the port connectors on your computer and on the monitor. In this case, reconnecting the two devices is very likely the solution to your problem. Fix 3: Reconnect your monitor to your computerĪ poor connection between your monitor and your computer might also be the cause of your problem. If your monitor works fine, move on to the fix below. If the problem still exists, you need to bring your monitor to the repair shop. If your monitor won’t turn on, unplug the power adapter of your monitor, and then plug it back into the power outlet.
If your computer starts but displays nothing, you should check is if your monitor is working properly.Ĭheck the power light of your monitor to verify that it’s turned on. If you boot into Automatic Repair, select Troubleshoot > Advanced options > Startup settings > Restart > Safe Mode with Networking, then skip to Fix 7 to see how to fix potential issues with your system. If nothing happened after turning your PC on and off a coupon of times, that could indicate a hardware problem. Doing this repeatedly for three times, the Windows Startup repair should launch automatically. If all you see is a black screen after pressing the power button, try pressing the power button for 10 seconds to force shut down your PC, then turn it on. Though it might look complicated at first glance, just work your way down the list, step-by-step, and we’ll try to get you back on track.
0 kommentar(er)
